✨ New Arrivals Just Dropped!Explore
Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit
HomeStore

Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit

Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit

Kit Contains:
Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
Magnus FBVH-500 Video Head with Flat Base

Add a stable aluminum tripod system to your camera kit with this Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit put together by . The kit includes the Oben ALF-6193 Skysill Series 3-section aluminum tripod and the Magnus FBVH-500 video head with a flat base and quick release plate.

The 3-section tripod features individually adjustable legs, flip locks, and spiked feet, and it is height adjustable up to 67". The video head mounts onto the tripod's 3/8"-16 screw and supports rigs up to 15 lb, includes a pan bar, and provides a sliding quick release plate with 1/4"-20 and 3/8"-16 screws to accommodate a variety of cameras.

Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

The sturdy, multi-featured ALF-6193 Skysill Series 3-Section Aluminum Tripod from Oben delivers rock-solid support for cameras. It can be set up quickly and offers a variety of options for studio or location photography. This durable aluminum tripod supports up to 19 lb and features flip locks that quickly and effortlessly adjust its height up to 67" with the 14" center column fully extended. The center column can be removed and reversed to shoot from an inverted perspective for macro photography. This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.

Each leg can be positioned independently at three locking angles, for shooting from lower perspectives or for leveling when on uneven terrain. A built-in bubble level helps keep the tripod aligned with the horizon, and interchangeable rubber or spiked feet provide traction on nearly any surface.

The ALF-6193 tripod features a 3/8"-16 accessory socket for attaching accessories like an articulating accessory arm to add an LED light, microphone, monitor, or flash to the tripod setup.

Aluminum 3-Section Tripod
The durable aluminum tripod features three-section telescoping legs secured by ergonomic flip locks.
Three Locking Leg Positions
The legs can be independently set and locked at 25, 51, or 71?angles for stable support at low angles on uneven terrain.
Reversible Center Column
The rapid center column is secured by a locking collar for easy height adjustment. It is removable and reversible for low-perspective shooting.
Short Center Column
This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.
Interchangeable Feet
The tripod's rubber feet prevent slipping on hard and highly polished surfaces, like a gym floor. The included spiked feet may be exchanged for solid footing on soft terrain and ice.
3/8"-16 Accessory Socket
An integrated 3/8"-16 accessory socket for attaching an accessory arm permits adding accessories like LED lights, microphones, monitors, or flashes to the tripod leg mount.
Reversible Tripod Head Mount
The center column's head mount is reversible for use with both 3/8"-16 and 1/4"-20 threaded bases.
UPC: 847628034242
Magnus FBVH-500 Video Head with Flat Base

The Magnus FBVH-500 Video Head with Flat Base is designed for shooters using cameras weighing up to 15 lb. It has a flat base that screws onto any standard 3/8"-16 tripod screw and gives you all the features of an advanced video head for performing professional cinematic moves. You can mount the included pan handle to either side of the head so you can create smooth and precise camera motion with either hand. The FBVH-500 head features a spring-loaded counterbalance with a tilt range of 170? (+90 to -80?), and it provides 360? panning rotation with adjustable fluid drag on both the pan and tilt axes.

The sliding QR plate features a snap-in function that allows you to quickly insert it into the head from above for effortless mounting and dismounting of large camera/lens combinations. And the plate's locking feature prevents it from accidentally slipping out of the clamp. The head attaches to a tripod via a 3/8"-16 thread. It also provides both 3/8"16 and 1/4"-20 auxiliary threads to attach accessories such as an articulating arm, LED, or microphone.

Flat Base
The FBVH-500 turns any tripod with a 3/8"-16 mounting screw into a full-featured video head, complete with adjustable pan and tilt drag controls and mounting options for camcorders and DSLR cameras. The head's flat base is compatible with most photo tripods, so you don't have to carry a special video tripod with you to switch from shooting still photography to video.
Fluid Head
With pan and tilt drag control, you can dial in the exact amount of resistance for your shot. The FBVH-500's fluid pan and drag adjustment controls deliver uniform and even panning and tilting for smooth camera motion, so your videos will look steady and professional.
Spring-Loaded Counterbalance
The spring-loaded counterbalance produces tension for ultrasmooth tilts with cameras up to 15 lb and helps prevent your camera from tipping over.
Sliding Balance Plate with Snap-In Feature
The balance plate slides into the clamp and locks in once inserted. This locking feature prevents the plate from accidentally slipping out of the clamp. It's also easier to mount larger camera and lens combinations on the head, thanks to the snap-in feature that lets you snap the plate into the top of the head.
Balance System
The sliding plate lets you find the perfect balance for your camera. Mark the balance point on the plate so you can remount your camera and instantly find the balance point.
Extendable Pan Bar
The pan bar lets you accurately and precisely control your video moves without the shaking that comes along with handheld operation. The bar extends from 13.5 to 22 inches for the perfect length for your setup. The head comes with dual rosettes for pan bar control from either side of the camera.
Auxiliary Sockets
The 1/4"-20 and 3/8"-16 auxiliary sockets are built into the head so you can add accessories like an articulating arm, LED, or microphone to improve the product value of your shoot. They're also good for safekeeping the mounting screws that aren't in use.
UPC: 847628044586

Items Included

  • Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
    • Oben 3/8"-16 Steel Spike Foot Set for Select Skysill Tripods
    • 3 x Allen Wrench
    • Short Center Column
    • Carry Bag
  • Magnus FBVH-500 Video Head with Flat Base
    • Magnus VT-QRP650 Sliding Balance Plate for VT-5000/VT-6000 Tripods
    • Magnus Telescoping Pan Handle for VT-5000/6000 and FBVH-500
    • 1/4"-20 Camera Tie-Down Screw
    • 3/8"-16 Camera Tie-Down Screw
    • Limited 5-Year Manufacturer Warranty

Additional Resources

Guides & Manuals

    Kit Contains:
    Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
    Magnus FBVH-500 Video Head with Flat Base

    Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

    Key Specs
    Head Mount Type
    1/4"-20 or 3/8"-16 Male
    Primary Material
    Aluminum
    Load Capacity
    19 lb / 8.6 kg
    Maximum Working Height
    67" / 170.2 cm
    Max Height without Center Column
    53" / 134.6 cm
    Minimum Working Height
    6" / 15.2 cm
    Closed Length
    25.5" / 64.8 cm
    Weight
    4.8 lb / 2.2 kg
    Legs
    Head Mount Type
    1/4"-20 or 3/8"-16 Male
    Primary Material
    Aluminum
    Leg Lock
    Flip Lock
    Leg Sections
    3
    Independent Leg Spread
    Yes
    Leg Positions
    3 Positions
    Foot Features
    Spiked, Removable
    General
    Load Capacity
    19 lb / 8.6 kg
    Maximum Working Height
    67" / 170.2 cm
    Center Column
    Yes (Round): Ballast Hook, Removable, Reversible
    Max Height without Center Column
    53" / 134.6 cm
    Minimum Working Height
    6" / 15.2 cm
    Closed Length
    25.5" / 64.8 cm
    Bubble Level
    Yes
    Weight
    4.8 lb / 2.2 kg
    Packaging Info
    Package Weight
    7.535 lb
    Box Dimensions (LxWxH)
    31.2 x 5.3 x 5.1"

    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    $619.49
    Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit—
    $619.49

    More Images

    Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit - Image 2
    Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit - Image 3

    Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit

    Kit Contains:
    Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
    Magnus FBVH-500 Video Head with Flat Base

    Add a stable aluminum tripod system to your camera kit with this Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit put together by . The kit includes the Oben ALF-6193 Skysill Series 3-section aluminum tripod and the Magnus FBVH-500 video head with a flat base and quick release plate.

    The 3-section tripod features individually adjustable legs, flip locks, and spiked feet, and it is height adjustable up to 67". The video head mounts onto the tripod's 3/8"-16 screw and supports rigs up to 15 lb, includes a pan bar, and provides a sliding quick release plate with 1/4"-20 and 3/8"-16 screws to accommodate a variety of cameras.

    Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

    The sturdy, multi-featured ALF-6193 Skysill Series 3-Section Aluminum Tripod from Oben delivers rock-solid support for cameras. It can be set up quickly and offers a variety of options for studio or location photography. This durable aluminum tripod supports up to 19 lb and features flip locks that quickly and effortlessly adjust its height up to 67" with the 14" center column fully extended. The center column can be removed and reversed to shoot from an inverted perspective for macro photography. This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.

    Each leg can be positioned independently at three locking angles, for shooting from lower perspectives or for leveling when on uneven terrain. A built-in bubble level helps keep the tripod aligned with the horizon, and interchangeable rubber or spiked feet provide traction on nearly any surface.

    The ALF-6193 tripod features a 3/8"-16 accessory socket for attaching accessories like an articulating accessory arm to add an LED light, microphone, monitor, or flash to the tripod setup.

    Aluminum 3-Section Tripod
    The durable aluminum tripod features three-section telescoping legs secured by ergonomic flip locks.
    Three Locking Leg Positions
    The legs can be independently set and locked at 25, 51, or 71?angles for stable support at low angles on uneven terrain.
    Reversible Center Column
    The rapid center column is secured by a locking collar for easy height adjustment. It is removable and reversible for low-perspective shooting.
    Short Center Column
    This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.
    Interchangeable Feet
    The tripod's rubber feet prevent slipping on hard and highly polished surfaces, like a gym floor. The included spiked feet may be exchanged for solid footing on soft terrain and ice.
    3/8"-16 Accessory Socket
    An integrated 3/8"-16 accessory socket for attaching an accessory arm permits adding accessories like LED lights, microphones, monitors, or flashes to the tripod leg mount.
    Reversible Tripod Head Mount
    The center column's head mount is reversible for use with both 3/8"-16 and 1/4"-20 threaded bases.
    UPC: 847628034242
    Magnus FBVH-500 Video Head with Flat Base

    The Magnus FBVH-500 Video Head with Flat Base is designed for shooters using cameras weighing up to 15 lb. It has a flat base that screws onto any standard 3/8"-16 tripod screw and gives you all the features of an advanced video head for performing professional cinematic moves. You can mount the included pan handle to either side of the head so you can create smooth and precise camera motion with either hand. The FBVH-500 head features a spring-loaded counterbalance with a tilt range of 170? (+90 to -80?), and it provides 360? panning rotation with adjustable fluid drag on both the pan and tilt axes.

    The sliding QR plate features a snap-in function that allows you to quickly insert it into the head from above for effortless mounting and dismounting of large camera/lens combinations. And the plate's locking feature prevents it from accidentally slipping out of the clamp. The head attaches to a tripod via a 3/8"-16 thread. It also provides both 3/8"16 and 1/4"-20 auxiliary threads to attach accessories such as an articulating arm, LED, or microphone.

    Flat Base
    The FBVH-500 turns any tripod with a 3/8"-16 mounting screw into a full-featured video head, complete with adjustable pan and tilt drag controls and mounting options for camcorders and DSLR cameras. The head's flat base is compatible with most photo tripods, so you don't have to carry a special video tripod with you to switch from shooting still photography to video.
    Fluid Head
    With pan and tilt drag control, you can dial in the exact amount of resistance for your shot. The FBVH-500's fluid pan and drag adjustment controls deliver uniform and even panning and tilting for smooth camera motion, so your videos will look steady and professional.
    Spring-Loaded Counterbalance
    The spring-loaded counterbalance produces tension for ultrasmooth tilts with cameras up to 15 lb and helps prevent your camera from tipping over.
    Sliding Balance Plate with Snap-In Feature
    The balance plate slides into the clamp and locks in once inserted. This locking feature prevents the plate from accidentally slipping out of the clamp. It's also easier to mount larger camera and lens combinations on the head, thanks to the snap-in feature that lets you snap the plate into the top of the head.
    Balance System
    The sliding plate lets you find the perfect balance for your camera. Mark the balance point on the plate so you can remount your camera and instantly find the balance point.
    Extendable Pan Bar
    The pan bar lets you accurately and precisely control your video moves without the shaking that comes along with handheld operation. The bar extends from 13.5 to 22 inches for the perfect length for your setup. The head comes with dual rosettes for pan bar control from either side of the camera.
    Auxiliary Sockets
    The 1/4"-20 and 3/8"-16 auxiliary sockets are built into the head so you can add accessories like an articulating arm, LED, or microphone to improve the product value of your shoot. They're also good for safekeeping the mounting screws that aren't in use.
    UPC: 847628044586

    Items Included

    • Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
      • Oben 3/8"-16 Steel Spike Foot Set for Select Skysill Tripods
      • 3 x Allen Wrench
      • Short Center Column
      • Carry Bag
    • Magnus FBVH-500 Video Head with Flat Base
      • Magnus VT-QRP650 Sliding Balance Plate for VT-5000/VT-6000 Tripods
      • Magnus Telescoping Pan Handle for VT-5000/6000 and FBVH-500
      • 1/4"-20 Camera Tie-Down Screw
      • 3/8"-16 Camera Tie-Down Screw
      • Limited 5-Year Manufacturer Warranty

    Additional Resources

    Guides & Manuals

      Kit Contains:
      Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
      Magnus FBVH-500 Video Head with Flat Base

      Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

      Key Specs
      Head Mount Type
      1/4"-20 or 3/8"-16 Male
      Primary Material
      Aluminum
      Load Capacity
      19 lb / 8.6 kg
      Maximum Working Height
      67" / 170.2 cm
      Max Height without Center Column
      53" / 134.6 cm
      Minimum Working Height
      6" / 15.2 cm
      Closed Length
      25.5" / 64.8 cm
      Weight
      4.8 lb / 2.2 kg
      Legs
      Head Mount Type
      1/4"-20 or 3/8"-16 Male
      Primary Material
      Aluminum
      Leg Lock
      Flip Lock
      Leg Sections
      3
      Independent Leg Spread
      Yes
      Leg Positions
      3 Positions
      Foot Features
      Spiked, Removable
      General
      Load Capacity
      19 lb / 8.6 kg
      Maximum Working Height
      67" / 170.2 cm
      Center Column
      Yes (Round): Ballast Hook, Removable, Reversible
      Max Height without Center Column
      53" / 134.6 cm
      Minimum Working Height
      6" / 15.2 cm
      Closed Length
      25.5" / 64.8 cm
      Bubble Level
      Yes
      Weight
      4.8 lb / 2.2 kg
      Packaging Info
      Package Weight
      7.535 lb
      Box Dimensions (LxWxH)
      31.2 x 5.3 x 5.1"

      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      Product Information

      Shipping & Returns

      Description

      Kit Contains:
      Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
      Magnus FBVH-500 Video Head with Flat Base

      Add a stable aluminum tripod system to your camera kit with this Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit put together by . The kit includes the Oben ALF-6193 Skysill Series 3-section aluminum tripod and the Magnus FBVH-500 video head with a flat base and quick release plate.

      The 3-section tripod features individually adjustable legs, flip locks, and spiked feet, and it is height adjustable up to 67". The video head mounts onto the tripod's 3/8"-16 screw and supports rigs up to 15 lb, includes a pan bar, and provides a sliding quick release plate with 1/4"-20 and 3/8"-16 screws to accommodate a variety of cameras.

      Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

      The sturdy, multi-featured ALF-6193 Skysill Series 3-Section Aluminum Tripod from Oben delivers rock-solid support for cameras. It can be set up quickly and offers a variety of options for studio or location photography. This durable aluminum tripod supports up to 19 lb and features flip locks that quickly and effortlessly adjust its height up to 67" with the 14" center column fully extended. The center column can be removed and reversed to shoot from an inverted perspective for macro photography. This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.

      Each leg can be positioned independently at three locking angles, for shooting from lower perspectives or for leveling when on uneven terrain. A built-in bubble level helps keep the tripod aligned with the horizon, and interchangeable rubber or spiked feet provide traction on nearly any surface.

      The ALF-6193 tripod features a 3/8"-16 accessory socket for attaching accessories like an articulating accessory arm to add an LED light, microphone, monitor, or flash to the tripod setup.

      Aluminum 3-Section Tripod
      The durable aluminum tripod features three-section telescoping legs secured by ergonomic flip locks.
      Three Locking Leg Positions
      The legs can be independently set and locked at 25, 51, or 71?angles for stable support at low angles on uneven terrain.
      Reversible Center Column
      The rapid center column is secured by a locking collar for easy height adjustment. It is removable and reversible for low-perspective shooting.
      Short Center Column
      This Skysill tripod includes an interchangeable short center column that allows the legs to be spread low to the floor for dramatic low-angle shots.
      Interchangeable Feet
      The tripod's rubber feet prevent slipping on hard and highly polished surfaces, like a gym floor. The included spiked feet may be exchanged for solid footing on soft terrain and ice.
      3/8"-16 Accessory Socket
      An integrated 3/8"-16 accessory socket for attaching an accessory arm permits adding accessories like LED lights, microphones, monitors, or flashes to the tripod leg mount.
      Reversible Tripod Head Mount
      The center column's head mount is reversible for use with both 3/8"-16 and 1/4"-20 threaded bases.
      UPC: 847628034242
      Magnus FBVH-500 Video Head with Flat Base

      The Magnus FBVH-500 Video Head with Flat Base is designed for shooters using cameras weighing up to 15 lb. It has a flat base that screws onto any standard 3/8"-16 tripod screw and gives you all the features of an advanced video head for performing professional cinematic moves. You can mount the included pan handle to either side of the head so you can create smooth and precise camera motion with either hand. The FBVH-500 head features a spring-loaded counterbalance with a tilt range of 170? (+90 to -80?), and it provides 360? panning rotation with adjustable fluid drag on both the pan and tilt axes.

      The sliding QR plate features a snap-in function that allows you to quickly insert it into the head from above for effortless mounting and dismounting of large camera/lens combinations. And the plate's locking feature prevents it from accidentally slipping out of the clamp. The head attaches to a tripod via a 3/8"-16 thread. It also provides both 3/8"16 and 1/4"-20 auxiliary threads to attach accessories such as an articulating arm, LED, or microphone.

      Flat Base
      The FBVH-500 turns any tripod with a 3/8"-16 mounting screw into a full-featured video head, complete with adjustable pan and tilt drag controls and mounting options for camcorders and DSLR cameras. The head's flat base is compatible with most photo tripods, so you don't have to carry a special video tripod with you to switch from shooting still photography to video.
      Fluid Head
      With pan and tilt drag control, you can dial in the exact amount of resistance for your shot. The FBVH-500's fluid pan and drag adjustment controls deliver uniform and even panning and tilting for smooth camera motion, so your videos will look steady and professional.
      Spring-Loaded Counterbalance
      The spring-loaded counterbalance produces tension for ultrasmooth tilts with cameras up to 15 lb and helps prevent your camera from tipping over.
      Sliding Balance Plate with Snap-In Feature
      The balance plate slides into the clamp and locks in once inserted. This locking feature prevents the plate from accidentally slipping out of the clamp. It's also easier to mount larger camera and lens combinations on the head, thanks to the snap-in feature that lets you snap the plate into the top of the head.
      Balance System
      The sliding plate lets you find the perfect balance for your camera. Mark the balance point on the plate so you can remount your camera and instantly find the balance point.
      Extendable Pan Bar
      The pan bar lets you accurately and precisely control your video moves without the shaking that comes along with handheld operation. The bar extends from 13.5 to 22 inches for the perfect length for your setup. The head comes with dual rosettes for pan bar control from either side of the camera.
      Auxiliary Sockets
      The 1/4"-20 and 3/8"-16 auxiliary sockets are built into the head so you can add accessories like an articulating arm, LED, or microphone to improve the product value of your shoot. They're also good for safekeeping the mounting screws that aren't in use.
      UPC: 847628044586

      Items Included

      • Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
        • Oben 3/8"-16 Steel Spike Foot Set for Select Skysill Tripods
        • 3 x Allen Wrench
        • Short Center Column
        • Carry Bag
      • Magnus FBVH-500 Video Head with Flat Base
        • Magnus VT-QRP650 Sliding Balance Plate for VT-5000/VT-6000 Tripods
        • Magnus Telescoping Pan Handle for VT-5000/6000 and FBVH-500
        • 1/4"-20 Camera Tie-Down Screw
        • 3/8"-16 Camera Tie-Down Screw
        • Limited 5-Year Manufacturer Warranty

      Additional Resources

      Guides & Manuals

        Kit Contains:
        Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod
        Magnus FBVH-500 Video Head with Flat Base

        Oben ALF-6193 Skysill Series 3-Section Aluminum Tripod

        Key Specs
        Head Mount Type
        1/4"-20 or 3/8"-16 Male
        Primary Material
        Aluminum
        Load Capacity
        19 lb / 8.6 kg
        Maximum Working Height
        67" / 170.2 cm
        Max Height without Center Column
        53" / 134.6 cm
        Minimum Working Height
        6" / 15.2 cm
        Closed Length
        25.5" / 64.8 cm
        Weight
        4.8 lb / 2.2 kg
        Legs
        Head Mount Type
        1/4"-20 or 3/8"-16 Male
        Primary Material
        Aluminum
        Leg Lock
        Flip Lock
        Leg Sections
        3
        Independent Leg Spread
        Yes
        Leg Positions
        3 Positions
        Foot Features
        Spiked, Removable
        General
        Load Capacity
        19 lb / 8.6 kg
        Maximum Working Height
        67" / 170.2 cm
        Center Column
        Yes (Round): Ballast Hook, Removable, Reversible
        Max Height without Center Column
        53" / 134.6 cm
        Minimum Working Height
        6" / 15.2 cm
        Closed Length
        25.5" / 64.8 cm
        Bubble Level
        Yes
        Weight
        4.8 lb / 2.2 kg
        Packaging Info
        Package Weight
        7.535 lb
        Box Dimensions (LxWxH)
        31.2 x 5.3 x 5.1"

        All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
        Oben 3-Section Aluminum Tripod with FBVH-500 Video Head Kit | Tanotis