✨ New Arrivals Just Dropped!Explore
Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)
HomeStore

Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)

Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)

Nady PEM-02 Overview

The Nady PEM-02 is a wireless in-ear monitoring system for two vocalists or musicians in clubs, concerts, or houses of worship. Comprised of a dual-channel tabletop transmitter with an AC adapter, two bodypack receivers, and two pairs of in-ear headphones, this two-person system is easy to use and offers a maximum range of 300'.

The PEM-02 offers 16 selectable UHF frequencies to choose from, allowing you to find two clean, interference-free transmission channels. Operating in the 903 to 928 MHz frequency range allows the system to avoid interference from TV channels and Wi-Fi devices for clearer transmission. A single removable antenna is supplied.

Infrared sync enables the transmitter and receivers to lock to the same frequencies quickly and easily. The transmitter's two 1/4" inputs accept unbalanced line-level signals, while an XLR input accepts balanced signals. A front-panel 1/4" TRS jack for stereo headphones allows you to monitor the signal from the transmitter.

Each of the two bodypack receivers features a 3.5mm dual-mono mini headphone jack and a 3.5mm line output for recording purposes. Two pairs of EB-6 earbuds with behind-the-ear cabling are provided for monitoring, but you can substitute them with your own favorite earbuds if you prefer. The receivers run for up to 11 hours on two AA batteries and feature channel displays along with LEDs to indicate battery status and radio signal strength.

Dual-channel, rackmount-ready transmitter with removable antenna for front or rear mounting
Two bodypack receivers with EB-6 in-ear headphones for monitoring
16 selectable frequency channels to avoid wireless RF conflict
Operates in the 902 to 928 MHz frequency range, free from TV broadcasting and Wi-Fi interference
Ultralow latency of 3 ms for accurate timing
Transmitter features two unbalanced 1/4" inputs, one balanced XLR input, and a 1/4" headphone jack
Instantaneous connection and setup with IR sync for components
Transmitter display shows channel, LEDs indicate RF and AF status
Bodypack receiver display shows channel, LEDs indicate battery and RF status
Adjustable headphone level knob on receiver
Power/channel button and removable belt clip on receiver
Includes AC power adapter, rackmounting kit, removable antenna, and BNC cable for front-mounting antenna
UPC: 634343118872

In the Box

  • Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)
  • 2 x EB-6 In-Ear Headphones
  • 2 x Bodypack Receivers
  • 2-Channel Tabletop Transmitter
  • Antenna
  • BNC Antenna Cable
  • Rackmount Kit
  • Power Adapter
  • Limited 1-Year Warranty

    Nady PEM-02 Specs

    Transmitter
    Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
    Inputs 2 x 1/4" / 6.3 mm Unbalanced Inputs
    1 x 3-Pin XLR Male Balanced Input
    Audio Channels 2
    Dynamic Range 120 dB
    Frequency Response ± 3dB 20 Hz to 20 kHz
    Latency <3 ms
    Outputs 1 x 1/4" / 6.3 mm TRS Headphone Jack
    Antenna Inputs 1 x BNC Coaxial
    Antenna Detachable Rear-Mount with Optional Front Mounting
    8.5" / 21.5 cm
    RF Power Output 50 mW
    Frequency Stability 0.005%
    Modulation FM
    Transmission Method Mono
    Spurious Emissions >60 dB
    Deviation <20 kHz
    Display Backlit LCD
    Power Requirement 12 VDC, 1000 mA via 21 mm Center-Positive Power Adapter (Included)
    Dimensions 1.75 x 8.25 x 7.125" / 4.4 x 21 x 18 cm
    Weight 2.2 lb / 0.9 kg
    Receiver
    Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
    Outputs 1 x 1/8" / 3.5 mm Dual-Mono Headphone Jack
    1 x 1/8" / 3.5 mm Line Output Jack
    Output Impedance 16 Ohms
    Power Requirement 2 x AA Alkaline Batteries
    Battery Life Up to 11 Hours
    Dimensions 4.25 x 2.375 x 1" / 10.8 x 6 x 2.5 cm
    Weight 2.4 oz / 68 g

    Nady PEM-02 Reviews


    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    $746.03
    Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)—
    $746.03

    More Images

    Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz) - Image 2

    Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)

    Nady PEM-02 Overview

    The Nady PEM-02 is a wireless in-ear monitoring system for two vocalists or musicians in clubs, concerts, or houses of worship. Comprised of a dual-channel tabletop transmitter with an AC adapter, two bodypack receivers, and two pairs of in-ear headphones, this two-person system is easy to use and offers a maximum range of 300'.

    The PEM-02 offers 16 selectable UHF frequencies to choose from, allowing you to find two clean, interference-free transmission channels. Operating in the 903 to 928 MHz frequency range allows the system to avoid interference from TV channels and Wi-Fi devices for clearer transmission. A single removable antenna is supplied.

    Infrared sync enables the transmitter and receivers to lock to the same frequencies quickly and easily. The transmitter's two 1/4" inputs accept unbalanced line-level signals, while an XLR input accepts balanced signals. A front-panel 1/4" TRS jack for stereo headphones allows you to monitor the signal from the transmitter.

    Each of the two bodypack receivers features a 3.5mm dual-mono mini headphone jack and a 3.5mm line output for recording purposes. Two pairs of EB-6 earbuds with behind-the-ear cabling are provided for monitoring, but you can substitute them with your own favorite earbuds if you prefer. The receivers run for up to 11 hours on two AA batteries and feature channel displays along with LEDs to indicate battery status and radio signal strength.

    Dual-channel, rackmount-ready transmitter with removable antenna for front or rear mounting
    Two bodypack receivers with EB-6 in-ear headphones for monitoring
    16 selectable frequency channels to avoid wireless RF conflict
    Operates in the 902 to 928 MHz frequency range, free from TV broadcasting and Wi-Fi interference
    Ultralow latency of 3 ms for accurate timing
    Transmitter features two unbalanced 1/4" inputs, one balanced XLR input, and a 1/4" headphone jack
    Instantaneous connection and setup with IR sync for components
    Transmitter display shows channel, LEDs indicate RF and AF status
    Bodypack receiver display shows channel, LEDs indicate battery and RF status
    Adjustable headphone level knob on receiver
    Power/channel button and removable belt clip on receiver
    Includes AC power adapter, rackmounting kit, removable antenna, and BNC cable for front-mounting antenna
    UPC: 634343118872

    In the Box

    • Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)
    • 2 x EB-6 In-Ear Headphones
    • 2 x Bodypack Receivers
    • 2-Channel Tabletop Transmitter
    • Antenna
    • BNC Antenna Cable
    • Rackmount Kit
    • Power Adapter
    • Limited 1-Year Warranty

      Nady PEM-02 Specs

      Transmitter
      Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
      Inputs 2 x 1/4" / 6.3 mm Unbalanced Inputs
      1 x 3-Pin XLR Male Balanced Input
      Audio Channels 2
      Dynamic Range 120 dB
      Frequency Response ± 3dB 20 Hz to 20 kHz
      Latency <3 ms
      Outputs 1 x 1/4" / 6.3 mm TRS Headphone Jack
      Antenna Inputs 1 x BNC Coaxial
      Antenna Detachable Rear-Mount with Optional Front Mounting
      8.5" / 21.5 cm
      RF Power Output 50 mW
      Frequency Stability 0.005%
      Modulation FM
      Transmission Method Mono
      Spurious Emissions >60 dB
      Deviation <20 kHz
      Display Backlit LCD
      Power Requirement 12 VDC, 1000 mA via 21 mm Center-Positive Power Adapter (Included)
      Dimensions 1.75 x 8.25 x 7.125" / 4.4 x 21 x 18 cm
      Weight 2.2 lb / 0.9 kg
      Receiver
      Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
      Outputs 1 x 1/8" / 3.5 mm Dual-Mono Headphone Jack
      1 x 1/8" / 3.5 mm Line Output Jack
      Output Impedance 16 Ohms
      Power Requirement 2 x AA Alkaline Batteries
      Battery Life Up to 11 Hours
      Dimensions 4.25 x 2.375 x 1" / 10.8 x 6 x 2.5 cm
      Weight 2.4 oz / 68 g

      Nady PEM-02 Reviews


      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      Product Information

      Shipping & Returns

      Description

      Nady PEM-02 Overview

      The Nady PEM-02 is a wireless in-ear monitoring system for two vocalists or musicians in clubs, concerts, or houses of worship. Comprised of a dual-channel tabletop transmitter with an AC adapter, two bodypack receivers, and two pairs of in-ear headphones, this two-person system is easy to use and offers a maximum range of 300'.

      The PEM-02 offers 16 selectable UHF frequencies to choose from, allowing you to find two clean, interference-free transmission channels. Operating in the 903 to 928 MHz frequency range allows the system to avoid interference from TV channels and Wi-Fi devices for clearer transmission. A single removable antenna is supplied.

      Infrared sync enables the transmitter and receivers to lock to the same frequencies quickly and easily. The transmitter's two 1/4" inputs accept unbalanced line-level signals, while an XLR input accepts balanced signals. A front-panel 1/4" TRS jack for stereo headphones allows you to monitor the signal from the transmitter.

      Each of the two bodypack receivers features a 3.5mm dual-mono mini headphone jack and a 3.5mm line output for recording purposes. Two pairs of EB-6 earbuds with behind-the-ear cabling are provided for monitoring, but you can substitute them with your own favorite earbuds if you prefer. The receivers run for up to 11 hours on two AA batteries and feature channel displays along with LEDs to indicate battery status and radio signal strength.

      Dual-channel, rackmount-ready transmitter with removable antenna for front or rear mounting
      Two bodypack receivers with EB-6 in-ear headphones for monitoring
      16 selectable frequency channels to avoid wireless RF conflict
      Operates in the 902 to 928 MHz frequency range, free from TV broadcasting and Wi-Fi interference
      Ultralow latency of 3 ms for accurate timing
      Transmitter features two unbalanced 1/4" inputs, one balanced XLR input, and a 1/4" headphone jack
      Instantaneous connection and setup with IR sync for components
      Transmitter display shows channel, LEDs indicate RF and AF status
      Bodypack receiver display shows channel, LEDs indicate battery and RF status
      Adjustable headphone level knob on receiver
      Power/channel button and removable belt clip on receiver
      Includes AC power adapter, rackmounting kit, removable antenna, and BNC cable for front-mounting antenna
      UPC: 634343118872

      In the Box

      • Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz)
      • 2 x EB-6 In-Ear Headphones
      • 2 x Bodypack Receivers
      • 2-Channel Tabletop Transmitter
      • Antenna
      • BNC Antenna Cable
      • Rackmount Kit
      • Power Adapter
      • Limited 1-Year Warranty

        Nady PEM-02 Specs

        Transmitter
        Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
        Inputs 2 x 1/4" / 6.3 mm Unbalanced Inputs
        1 x 3-Pin XLR Male Balanced Input
        Audio Channels 2
        Dynamic Range 120 dB
        Frequency Response ± 3dB 20 Hz to 20 kHz
        Latency <3 ms
        Outputs 1 x 1/4" / 6.3 mm TRS Headphone Jack
        Antenna Inputs 1 x BNC Coaxial
        Antenna Detachable Rear-Mount with Optional Front Mounting
        8.5" / 21.5 cm
        RF Power Output 50 mW
        Frequency Stability 0.005%
        Modulation FM
        Transmission Method Mono
        Spurious Emissions >60 dB
        Deviation <20 kHz
        Display Backlit LCD
        Power Requirement 12 VDC, 1000 mA via 21 mm Center-Positive Power Adapter (Included)
        Dimensions 1.75 x 8.25 x 7.125" / 4.4 x 21 x 18 cm
        Weight 2.2 lb / 0.9 kg
        Receiver
        Frequencies 903.250, 903.825, 904.875, 905.325, 905.975, 906.575, 907.225, 908.425, 909.075, 910.875, 911.325, 916.850, 925.000, 925.650, 926.850, 927.650 MHz
        Outputs 1 x 1/8" / 3.5 mm Dual-Mono Headphone Jack
        1 x 1/8" / 3.5 mm Line Output Jack
        Output Impedance 16 Ohms
        Power Requirement 2 x AA Alkaline Batteries
        Battery Life Up to 11 Hours
        Dimensions 4.25 x 2.375 x 1" / 10.8 x 6 x 2.5 cm
        Weight 2.4 oz / 68 g

        Nady PEM-02 Reviews


        All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
        Nady PEM-02 Wireless 2-Person In-Ear Monitoring System (903 to 928 MHz) | Tanotis