MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
MegaGear Ever Ready Leather Overview
Give your select Panasonic LUMIX camera with 12-32mm lens a touch of elegance while also protecting it from dirt, scratches, and bumps with the dark brown Ever Ready PU Leather Case and Strap from MegaGear. This two-piece case offers easy battery access and consists of a top and bottom, as well as a matching shoulder strap. The bottom half may be used independently as a half-case and attaches to the built-in tripod mounting screw. This screw is threaded on the bottom for convenient tripod usage without having to remove the case. The top piece completes the all-round protection and attaches with snaps. For style, this case has attractive stitching reminiscent of old world craftsmanship. The suede-like interior finish helps protect your camera from scratches.
In the Box
- MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
- Shoulder Strap
MegaGear Ever Ready Leather Specs
| Carrying/Transport Options | Shoulder Strap |
| Exterior Material | Faux Leather |
| Type of Closure | Snap |
| Package Weight | 0.565 lb |
| Box Dimensions (LxWxH) | 6.7 x 5.7 x 3.9" |
MegaGear Ever Ready Leather Reviews
looks good, fits well
I just bought this to go with an X-T30ii. The case fits really well, just a big snug, but I think it will loosen up a bit. I like the battery/card hatch. I have not tried to mount it on a tripod and am not sure I will. The strap feels sturdy.
Great material. Non funtional
Can use the camera while on the case. Great material, wish it was functional
Doesn't fit the camera.
Doesn't fit the camera. Not great leather material. Returned.
Looks and Works Great!
This case fits like a glove! It looks great on my a7ii. most of the time I only use the lower half of the case and snap on the upper half when traveling or packing the camera. The case allows access to the battery, memory card, and cable access without having to remove it. Looks great too!
Beautiful
Very nice, beautiful leather- great quality - fits perfectly on my A6100.
Good idea, but flawed
I purchased this to use with a Fuji X-T20 and 18-55mm. There are 2 problems with the design: 1. The vertical portion of the back is not tall enough, so it has to be pushed down to get the snap to line up and close the top. It does close, but it's tight on the flash mount and has a gap along the camera rear. 2. The snaps on the bottom are somewhat close to the tripod mount. My old tripod has a 2-7/8 diameter plate, and the snaps would hit this, meaning I would have to take off the case bottom to use on my tripod. If the male/female snaps were reversed, it could have been possible to avoid the issue. An additional problem with the one I got was that the snap holding the top to the bottom was extremely tight. It felt like I was going to tear the snap out when removing. The case is a lot like the one I had for an old (early '60's?) Pentax that detached easily by swiveling the top 1/2 turn from the bottom. I was looking forward to this same versatile design, but it didn't work out and am returning it. Appreciate 's easy return!
A snug fitting piece of protection
The case is designed to protect ample protection for the M50. Since it is designed to 'stretch' with regular use, it is initially quite snug. The most difficult snap to get in place is the one which holds the opening flap closed after each use. It was (is) difficult to snap in place. But it should get easier as the leather breaks in.
Great Case
This case looks very well build and seems to be great protection for my Canon T6 camera.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
More Images
MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
MegaGear Ever Ready Leather Overview
Give your select Panasonic LUMIX camera with 12-32mm lens a touch of elegance while also protecting it from dirt, scratches, and bumps with the dark brown Ever Ready PU Leather Case and Strap from MegaGear. This two-piece case offers easy battery access and consists of a top and bottom, as well as a matching shoulder strap. The bottom half may be used independently as a half-case and attaches to the built-in tripod mounting screw. This screw is threaded on the bottom for convenient tripod usage without having to remove the case. The top piece completes the all-round protection and attaches with snaps. For style, this case has attractive stitching reminiscent of old world craftsmanship. The suede-like interior finish helps protect your camera from scratches.
In the Box
- MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
- Shoulder Strap
MegaGear Ever Ready Leather Specs
| Carrying/Transport Options | Shoulder Strap |
| Exterior Material | Faux Leather |
| Type of Closure | Snap |
| Package Weight | 0.565 lb |
| Box Dimensions (LxWxH) | 6.7 x 5.7 x 3.9" |
MegaGear Ever Ready Leather Reviews
looks good, fits well
I just bought this to go with an X-T30ii. The case fits really well, just a big snug, but I think it will loosen up a bit. I like the battery/card hatch. I have not tried to mount it on a tripod and am not sure I will. The strap feels sturdy.
Great material. Non funtional
Can use the camera while on the case. Great material, wish it was functional
Doesn't fit the camera.
Doesn't fit the camera. Not great leather material. Returned.
Looks and Works Great!
This case fits like a glove! It looks great on my a7ii. most of the time I only use the lower half of the case and snap on the upper half when traveling or packing the camera. The case allows access to the battery, memory card, and cable access without having to remove it. Looks great too!
Beautiful
Very nice, beautiful leather- great quality - fits perfectly on my A6100.
Good idea, but flawed
I purchased this to use with a Fuji X-T20 and 18-55mm. There are 2 problems with the design: 1. The vertical portion of the back is not tall enough, so it has to be pushed down to get the snap to line up and close the top. It does close, but it's tight on the flash mount and has a gap along the camera rear. 2. The snaps on the bottom are somewhat close to the tripod mount. My old tripod has a 2-7/8 diameter plate, and the snaps would hit this, meaning I would have to take off the case bottom to use on my tripod. If the male/female snaps were reversed, it could have been possible to avoid the issue. An additional problem with the one I got was that the snap holding the top to the bottom was extremely tight. It felt like I was going to tear the snap out when removing. The case is a lot like the one I had for an old (early '60's?) Pentax that detached easily by swiveling the top 1/2 turn from the bottom. I was looking forward to this same versatile design, but it didn't work out and am returning it. Appreciate 's easy return!
A snug fitting piece of protection
The case is designed to protect ample protection for the M50. Since it is designed to 'stretch' with regular use, it is initially quite snug. The most difficult snap to get in place is the one which holds the opening flap closed after each use. It was (is) difficult to snap in place. But it should get easier as the leather breaks in.
Great Case
This case looks very well build and seems to be great protection for my Canon T6 camera.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MegaGear Ever Ready Leather Overview
Give your select Panasonic LUMIX camera with 12-32mm lens a touch of elegance while also protecting it from dirt, scratches, and bumps with the dark brown Ever Ready PU Leather Case and Strap from MegaGear. This two-piece case offers easy battery access and consists of a top and bottom, as well as a matching shoulder strap. The bottom half may be used independently as a half-case and attaches to the built-in tripod mounting screw. This screw is threaded on the bottom for convenient tripod usage without having to remove the case. The top piece completes the all-round protection and attaches with snaps. For style, this case has attractive stitching reminiscent of old world craftsmanship. The suede-like interior finish helps protect your camera from scratches.
In the Box
- MegaGear Ever Ready PU Leather Case & Strap for Select Panasonic LUMIX with 12-32mm (Dark Brown)
- Shoulder Strap
MegaGear Ever Ready Leather Specs
| Carrying/Transport Options | Shoulder Strap |
| Exterior Material | Faux Leather |
| Type of Closure | Snap |
| Package Weight | 0.565 lb |
| Box Dimensions (LxWxH) | 6.7 x 5.7 x 3.9" |
MegaGear Ever Ready Leather Reviews
looks good, fits well
I just bought this to go with an X-T30ii. The case fits really well, just a big snug, but I think it will loosen up a bit. I like the battery/card hatch. I have not tried to mount it on a tripod and am not sure I will. The strap feels sturdy.
Great material. Non funtional
Can use the camera while on the case. Great material, wish it was functional
Doesn't fit the camera.
Doesn't fit the camera. Not great leather material. Returned.
Looks and Works Great!
This case fits like a glove! It looks great on my a7ii. most of the time I only use the lower half of the case and snap on the upper half when traveling or packing the camera. The case allows access to the battery, memory card, and cable access without having to remove it. Looks great too!
Beautiful
Very nice, beautiful leather- great quality - fits perfectly on my A6100.
Good idea, but flawed
I purchased this to use with a Fuji X-T20 and 18-55mm. There are 2 problems with the design: 1. The vertical portion of the back is not tall enough, so it has to be pushed down to get the snap to line up and close the top. It does close, but it's tight on the flash mount and has a gap along the camera rear. 2. The snaps on the bottom are somewhat close to the tripod mount. My old tripod has a 2-7/8 diameter plate, and the snaps would hit this, meaning I would have to take off the case bottom to use on my tripod. If the male/female snaps were reversed, it could have been possible to avoid the issue. An additional problem with the one I got was that the snap holding the top to the bottom was extremely tight. It felt like I was going to tear the snap out when removing. The case is a lot like the one I had for an old (early '60's?) Pentax that detached easily by swiveling the top 1/2 turn from the bottom. I was looking forward to this same versatile design, but it didn't work out and am returning it. Appreciate 's easy return!
A snug fitting piece of protection
The case is designed to protect ample protection for the M50. Since it is designed to 'stretch' with regular use, it is initially quite snug. The most difficult snap to get in place is the one which holds the opening flap closed after each use. It was (is) difficult to snap in place. But it should get easier as the leather breaks in.
Great Case
This case looks very well build and seems to be great protection for my Canon T6 camera.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
