✨ New Arrivals Just Dropped!Explore
intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)
HomeStore

intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)

intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)

intellijel STOMP-3U Overview

Expand your palette of possibilities by adding stomp boxes to your modular setup with the intellijel Stomp, a Eurorack module with an effects pedal send/return, expression control, and a built-in LFO. Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. Stomp supports your pedal's expression pedal input if it has one, and features a built-in LFO to modulate your expression pedal's input.

Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and�most importantly�the near-infinite CV modulation delights inherent in Eurorack. The module includes a power ribbon cable.

At a Glance
  • Robust Neutrik 1/4? TS connectors for the SEND/RETURN and TRS for the Expression interface
  • Signals arriving at Stomp�s RETURN jack pass through a Class-A triode emulator, allowing for some tubelike overdrive at high-gain settings.
  • SEND output is normalled to RETURN input, so even without 1/4? cables you can route Eurorack signals through the FET stage for coloring.
  • Stomp is more than just a simple level shifter�it�s also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
  • Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
  • Supports both PEDAL/INST and LINE levels via a front-panel switch.
  • Use Stomp�s RETURN circuit as a direct box for connecting any instrument.
  • The high-input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
  • Use Stomp in the studio as an active reamping device to play prerecorded tracks back through guitar amplifiers or pedals.
  • All inputs are protected for minimum RF interference.
  • Return signal can be phase inverted for use with those pedals or effects types that invert phase.
  • Low SEND output impedance for driving long cables, lower noise, and minimum interference from outside sources.
  • The Expression Pedal Output converts analog CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.
  • If the internal LFO is set to 0 Hz (full CCW), the EXPR knob can be used as a manual expression pedal control level.
Eurorack Ready
  • 8 HP Eurorack format module
  • Maximum depth: 1.4" (35mm)
  • Includes power ribbon cable with Eurorack power headers
  • Power consumption: +12V: 47mA, -12V: 13mA

In the Box

  • intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)
  • Ribbon Power Cable
  • Limited 2-Year Manufacturer Warranty

Not in the Box

    intellijel STOMP-3U Specs

    Key Specs
    Sound Generation
    Analog
    Audio I/O
    1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
    1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
    1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
    1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
    MIDI I/O
    No
    CV/Gate I/O
    1x 1/8" / 3.5 mm TS CV Input
    1x 1/8" / 3.5 mm TS CV Output
    Patch Points
    3x 1/8" / 3.5 mm TS Input
    3x 1/8" / 3.5 mm TS Output
    Eurorack Current Consumption
    47 mA on +12 V Rail
    13 mA on -12 V Rail
    Horizontal Pitch
    8 HP
    General
    Item Type
    Eurorack Module
    Sound Generation
    Analog
    Expression Controls
    No
    Number of Pads
    No
    Built-In Effects
    Yes
    Built-In Speaker
    No
    Synthesis
    Oscillators
    No
    Mixer
    No
    Amplifiers
    No
    Envelopes
    No
    Filters
    No
    LFOs
    Number of LFOs: 1x Global
    Waveforms: Square, Triangle, Random
    Sequencing & Recording
    Sequencer
    No
    Arpeggiator
    No
    Connectivity
    Audio I/O
    1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
    1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
    1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
    1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
    MIDI I/O
    No
    CV/Gate I/O
    1x 1/8" / 3.5 mm TS CV Input
    1x 1/8" / 3.5 mm TS CV Output
    Patch Points
    3x 1/8" / 3.5 mm TS Input
    3x 1/8" / 3.5 mm TS Output
    Sync I/O
    No
    Power
    Power Requirements
    Eurorack Power
    Eurorack Current Consumption
    47 mA on +12 V Rail
    13 mA on -12 V Rail
    Physical
    Horizontal Pitch
    8 HP
    Included Accessories
    No
    Packaging Info
    Package Weight
    0.375 lb
    Box Dimensions (LxWxH)
    5.6 x 3.4 x 3.1"

    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    $365.02
    intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)—
    $365.02

    intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)

    intellijel STOMP-3U Overview

    Expand your palette of possibilities by adding stomp boxes to your modular setup with the intellijel Stomp, a Eurorack module with an effects pedal send/return, expression control, and a built-in LFO. Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. Stomp supports your pedal's expression pedal input if it has one, and features a built-in LFO to modulate your expression pedal's input.

    Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and�most importantly�the near-infinite CV modulation delights inherent in Eurorack. The module includes a power ribbon cable.

    At a Glance
    • Robust Neutrik 1/4? TS connectors for the SEND/RETURN and TRS for the Expression interface
    • Signals arriving at Stomp�s RETURN jack pass through a Class-A triode emulator, allowing for some tubelike overdrive at high-gain settings.
    • SEND output is normalled to RETURN input, so even without 1/4? cables you can route Eurorack signals through the FET stage for coloring.
    • Stomp is more than just a simple level shifter�it�s also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
    • Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
    • Supports both PEDAL/INST and LINE levels via a front-panel switch.
    • Use Stomp�s RETURN circuit as a direct box for connecting any instrument.
    • The high-input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
    • Use Stomp in the studio as an active reamping device to play prerecorded tracks back through guitar amplifiers or pedals.
    • All inputs are protected for minimum RF interference.
    • Return signal can be phase inverted for use with those pedals or effects types that invert phase.
    • Low SEND output impedance for driving long cables, lower noise, and minimum interference from outside sources.
    • The Expression Pedal Output converts analog CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.
    • If the internal LFO is set to 0 Hz (full CCW), the EXPR knob can be used as a manual expression pedal control level.
    Eurorack Ready
    • 8 HP Eurorack format module
    • Maximum depth: 1.4" (35mm)
    • Includes power ribbon cable with Eurorack power headers
    • Power consumption: +12V: 47mA, -12V: 13mA

    In the Box

    • intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)
    • Ribbon Power Cable
    • Limited 2-Year Manufacturer Warranty

    Not in the Box

      intellijel STOMP-3U Specs

      Key Specs
      Sound Generation
      Analog
      Audio I/O
      1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
      1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
      1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
      1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
      MIDI I/O
      No
      CV/Gate I/O
      1x 1/8" / 3.5 mm TS CV Input
      1x 1/8" / 3.5 mm TS CV Output
      Patch Points
      3x 1/8" / 3.5 mm TS Input
      3x 1/8" / 3.5 mm TS Output
      Eurorack Current Consumption
      47 mA on +12 V Rail
      13 mA on -12 V Rail
      Horizontal Pitch
      8 HP
      General
      Item Type
      Eurorack Module
      Sound Generation
      Analog
      Expression Controls
      No
      Number of Pads
      No
      Built-In Effects
      Yes
      Built-In Speaker
      No
      Synthesis
      Oscillators
      No
      Mixer
      No
      Amplifiers
      No
      Envelopes
      No
      Filters
      No
      LFOs
      Number of LFOs: 1x Global
      Waveforms: Square, Triangle, Random
      Sequencing & Recording
      Sequencer
      No
      Arpeggiator
      No
      Connectivity
      Audio I/O
      1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
      1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
      1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
      1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
      MIDI I/O
      No
      CV/Gate I/O
      1x 1/8" / 3.5 mm TS CV Input
      1x 1/8" / 3.5 mm TS CV Output
      Patch Points
      3x 1/8" / 3.5 mm TS Input
      3x 1/8" / 3.5 mm TS Output
      Sync I/O
      No
      Power
      Power Requirements
      Eurorack Power
      Eurorack Current Consumption
      47 mA on +12 V Rail
      13 mA on -12 V Rail
      Physical
      Horizontal Pitch
      8 HP
      Included Accessories
      No
      Packaging Info
      Package Weight
      0.375 lb
      Box Dimensions (LxWxH)
      5.6 x 3.4 x 3.1"

      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      Product Information

      Shipping & Returns

      Description

      intellijel STOMP-3U Overview

      Expand your palette of possibilities by adding stomp boxes to your modular setup with the intellijel Stomp, a Eurorack module with an effects pedal send/return, expression control, and a built-in LFO. Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. Stomp supports your pedal's expression pedal input if it has one, and features a built-in LFO to modulate your expression pedal's input.

      Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and�most importantly�the near-infinite CV modulation delights inherent in Eurorack. The module includes a power ribbon cable.

      At a Glance
      • Robust Neutrik 1/4? TS connectors for the SEND/RETURN and TRS for the Expression interface
      • Signals arriving at Stomp�s RETURN jack pass through a Class-A triode emulator, allowing for some tubelike overdrive at high-gain settings.
      • SEND output is normalled to RETURN input, so even without 1/4? cables you can route Eurorack signals through the FET stage for coloring.
      • Stomp is more than just a simple level shifter�it�s also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
      • Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
      • Supports both PEDAL/INST and LINE levels via a front-panel switch.
      • Use Stomp�s RETURN circuit as a direct box for connecting any instrument.
      • The high-input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
      • Use Stomp in the studio as an active reamping device to play prerecorded tracks back through guitar amplifiers or pedals.
      • All inputs are protected for minimum RF interference.
      • Return signal can be phase inverted for use with those pedals or effects types that invert phase.
      • Low SEND output impedance for driving long cables, lower noise, and minimum interference from outside sources.
      • The Expression Pedal Output converts analog CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.
      • If the internal LFO is set to 0 Hz (full CCW), the EXPR knob can be used as a manual expression pedal control level.
      Eurorack Ready
      • 8 HP Eurorack format module
      • Maximum depth: 1.4" (35mm)
      • Includes power ribbon cable with Eurorack power headers
      • Power consumption: +12V: 47mA, -12V: 13mA

      In the Box

      • intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP)
      • Ribbon Power Cable
      • Limited 2-Year Manufacturer Warranty

      Not in the Box

        intellijel STOMP-3U Specs

        Key Specs
        Sound Generation
        Analog
        Audio I/O
        1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
        1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
        1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
        1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
        MIDI I/O
        No
        CV/Gate I/O
        1x 1/8" / 3.5 mm TS CV Input
        1x 1/8" / 3.5 mm TS CV Output
        Patch Points
        3x 1/8" / 3.5 mm TS Input
        3x 1/8" / 3.5 mm TS Output
        Eurorack Current Consumption
        47 mA on +12 V Rail
        13 mA on -12 V Rail
        Horizontal Pitch
        8 HP
        General
        Item Type
        Eurorack Module
        Sound Generation
        Analog
        Expression Controls
        No
        Number of Pads
        No
        Built-In Effects
        Yes
        Built-In Speaker
        No
        Synthesis
        Oscillators
        No
        Mixer
        No
        Amplifiers
        No
        Envelopes
        No
        Filters
        No
        LFOs
        Number of LFOs: 1x Global
        Waveforms: Square, Triangle, Random
        Sequencing & Recording
        Sequencer
        No
        Arpeggiator
        No
        Connectivity
        Audio I/O
        1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Input
        1x 1/8" / 3.5 mm TS Unbalanced Mono Line/Hi-Z/Instrument Output
        1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input
        1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
        MIDI I/O
        No
        CV/Gate I/O
        1x 1/8" / 3.5 mm TS CV Input
        1x 1/8" / 3.5 mm TS CV Output
        Patch Points
        3x 1/8" / 3.5 mm TS Input
        3x 1/8" / 3.5 mm TS Output
        Sync I/O
        No
        Power
        Power Requirements
        Eurorack Power
        Eurorack Current Consumption
        47 mA on +12 V Rail
        13 mA on -12 V Rail
        Physical
        Horizontal Pitch
        8 HP
        Included Accessories
        No
        Packaging Info
        Package Weight
        0.375 lb
        Box Dimensions (LxWxH)
        5.6 x 3.4 x 3.1"

        All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
        intellijel Stomp Effects Pedal Send/Return with Expression Control and LFO Eurorack Module (8 HP) | Tanotis