✨ New Arrivals Just Dropped!Explore
AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable
HomeStore

AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable

AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable

Kit Contains:
AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

This Kit includes the AEA NUVO N22 Near-Field Phantom-Powered Ribbon Microphone along with an adjustable tripod stand and a black 25' Mogami Gold XLR cable, so you can plug-in, power up the mic, and start recording instruments and vocals with the classic sound of a ribbon element. The phantom-powered custom transformer and JFET electronics provide +12 dB of output gain, allowing the NUVO N22 to work with a wider range of preamps than traditional passive ribbon mics.

AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

Offering the robust sound of a traditional side-address large-ribbon mic in a compact and lightweight form factor designed for near-field use, the AEA Ribbon Mics NUVO N22 active ribbon microphone is ideal for up-close capture of anything from vocals and nuanced acoustic instruments to loud amps and pounding drums, in the studio or on the stage. The inclusion of a custom transformer helps the NUVO N22 achieve a strong output level while retaining low-noise performance.

As a near-field ribbon, the NUVO N22 provides reduced proximity effect and balanced tonality to make it ideal for placement from 1 to 18" away from the source. Its figure-8 polar pattern exhibits the classic pickup traits and side-rejection qualities associated with ribbon mics. A standard XLR 3-pin male connector is on the mic for hookup to virtually any microphone preamp; 48V phantom power is required to power the mic's active electronics.

Near-Field Ribbon
The N22 can be positioned inches away from an instrument and retain a balanced sound with extended top-end while avoiding the room tone that can cause problems in smaller spaces or iso booths. This is what makes the N22 special.
3 kHz Bump
It exhibits a high-frequency bump at 3 kHz making it ideal for recording vocals, electric guitar, bass cabs, kick drum, acoustic guitar, and percussion. It is best to think of the N22's placement in terms of inches instead of feet.
Reduced Proximity Effect
The N22 naturally reduces proximity effect while also avoiding the room tone that can cause problems in smaller spaces or iso booths. Naturally rolling off the low-end before it hits the ribbon creates a much different sound than using electronic equalization to attenuate the low-end in post.
Active Electronics
The N22 uses the same custom transformer utilized in the AEA A440 and R84A microphones, enabling an additional 12 dB of output and a stable impedance. Though it still sounds great with any AEA ribbon-optimized preamp, it is not dependent on a high-impedance, high-gain preamp for proper use.

The extra output is a major advantage when recording quiet sources like vocals and soft acoustic guitars. The active circuitry also prevents noise and interference on long cable runs and when operating near large lighting rigs.
Ready for the Road
With increased durability and a small profile, it's no wonder that a wide range of performers use AEA's NUVO series microphones on the road. The mics are totally rugged and hold up to daily wear and tear.

From outdoor gigs at music festivals to indoor theaters, NUVO mics are the perfect companion to bring the sound of studio recordings to the live stage. With the optional NUVO windscreen, never worry about the ribbon, even at windy gigs.
Features at a Glance
  • Extended top end with a ribbon?s classic warmth
  • Near-field ribbon mic with reduced proximity effect
  • Balanced frequency response at 1 to 18" from the source
  • Compact, lightweight design with rugged durability
  • Active electronics and custom transformer optimized for all preamps
  • Made in the USA
UPC: 652401977490
K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)

The black 210/9 Tripod Microphone Stand with Telescoping Boom from K&M is a height adjustable stand with a 17.1 to 29.3" telescoping boom arm. The microphone stand offers sturdy support for live sound, theater, rehearsal, and recording applications. It features a clutch to allow you to raise the stand height from 35.4 to 63.2" and a 5/8" thread for mounting microphones (available separately).

UPC: 784887129824
Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

The black, 25' Mogami Gold Studio XLR Female to XLR Male Microphone Cable is a high-quality, 4-conductor cable engineered for maximum rejection of RFI and EMI, accurate signal transmission with low noise, and durability. It uses the company's Neglex twisted, double-conductor quad cable with a spiral, bare copper shield, which is effective in maintaining signal integrity, even when used with unbalanced equipment, in professional or home studios suffering from wiring and grounding problems.

The cable is terminated with black-body, gold-plated XLR connectors, and features a 0.236" diameter jacket, ideal for applications where a small-diameter quad mic cable is required.

Key Features
Studio and broadcast-quality microphone cable wired with Mogami 2534 Neglex twisted quad-conductor cable
Ideal for home studios suffering from wiring and grounding problems?maintains signal quality when used with unbalanced equipment
Served (spiral) bare copper shield for long-lasting protection against RFI and EMI
XLPE (Cross-Linked Polyethylene) conductor insulation
Terminated with black-body, 3-pin XLR connectors (XLR female to XLR male)
Gold-plated contacts to prevent corrosion
0.236" jacket diameter?for use where a small-diameter quad mic cable is required
Limited lifetime warranty
UPC: 801813075847

Items Included

  • AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
    • Mic Stand Clip
    • Custom Protective Mic Sleeve
    • Storage Case
    • Limited 1-Year Manufacturer Warranty
      Registration Extension: 2-Year (US Only)
  • K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
    • Limited 3-Year Manufacturer Warranty
  • Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)
    • Limited Lifetime Manufacturer Warranty

Additional Resources

    Kit Contains:
    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
    K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
    Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

    Key Specs
    Microphone Type
    Ribbon
    Polar Pattern
    Figure-8
    Element Type
    Ribbon
    Controls
    No
    Frequency Response
    20 Hz to 20 kHz
    Maximum SPL
    141 dB (1 kHz, 1% THD)
    Analog Output
    1x XLR 3-Pin Male
    Power Sources
    Phantom Power
    Microphone
    Microphone Type
    Ribbon
    Polar Pattern
    Figure-8
    Element Type
    Ribbon
    Sound Field
    Mono
    Diaphragm
    2.35" / 59.69 mm
    Orientation
    Side Address
    Controls
    No
    Pad
    No
    Circuitry
    Solid-State
    Performance
    Frequency Response
    20 Hz to 20 kHz
    Maximum SPL
    141 dB (1 kHz, 1% THD)
    Off-Axis Rejection
    6 dB at 60?
    6 dB at 120?
    0 dB at 180?
    Connectivity
    Analog Output
    1x XLR 3-Pin Male
    Power
    Power Sources
    Phantom Power
    Operating Voltage
    48 V (Phantom Power)
    Physical
    Color
    Silver
    Dimensions
    ?: 1.62 x L: 8.83" / ?: 4.11 x L: 22.43 cm
    Weight
    12 oz / 340 g
    Packaging Info
    Package Weight
    2.255 lb
    Box Dimensions (LxWxH)
    12.2 x 9.1 x 4.3"

    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    $2,255.13
    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable—
    $2,255.13

    More Images

    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable - Image 2
    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable - Image 3
    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable - Image 4

    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable

    Kit Contains:
    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
    K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
    Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

    This Kit includes the AEA NUVO N22 Near-Field Phantom-Powered Ribbon Microphone along with an adjustable tripod stand and a black 25' Mogami Gold XLR cable, so you can plug-in, power up the mic, and start recording instruments and vocals with the classic sound of a ribbon element. The phantom-powered custom transformer and JFET electronics provide +12 dB of output gain, allowing the NUVO N22 to work with a wider range of preamps than traditional passive ribbon mics.

    AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

    Offering the robust sound of a traditional side-address large-ribbon mic in a compact and lightweight form factor designed for near-field use, the AEA Ribbon Mics NUVO N22 active ribbon microphone is ideal for up-close capture of anything from vocals and nuanced acoustic instruments to loud amps and pounding drums, in the studio or on the stage. The inclusion of a custom transformer helps the NUVO N22 achieve a strong output level while retaining low-noise performance.

    As a near-field ribbon, the NUVO N22 provides reduced proximity effect and balanced tonality to make it ideal for placement from 1 to 18" away from the source. Its figure-8 polar pattern exhibits the classic pickup traits and side-rejection qualities associated with ribbon mics. A standard XLR 3-pin male connector is on the mic for hookup to virtually any microphone preamp; 48V phantom power is required to power the mic's active electronics.

    Near-Field Ribbon
    The N22 can be positioned inches away from an instrument and retain a balanced sound with extended top-end while avoiding the room tone that can cause problems in smaller spaces or iso booths. This is what makes the N22 special.
    3 kHz Bump
    It exhibits a high-frequency bump at 3 kHz making it ideal for recording vocals, electric guitar, bass cabs, kick drum, acoustic guitar, and percussion. It is best to think of the N22's placement in terms of inches instead of feet.
    Reduced Proximity Effect
    The N22 naturally reduces proximity effect while also avoiding the room tone that can cause problems in smaller spaces or iso booths. Naturally rolling off the low-end before it hits the ribbon creates a much different sound than using electronic equalization to attenuate the low-end in post.
    Active Electronics
    The N22 uses the same custom transformer utilized in the AEA A440 and R84A microphones, enabling an additional 12 dB of output and a stable impedance. Though it still sounds great with any AEA ribbon-optimized preamp, it is not dependent on a high-impedance, high-gain preamp for proper use.

    The extra output is a major advantage when recording quiet sources like vocals and soft acoustic guitars. The active circuitry also prevents noise and interference on long cable runs and when operating near large lighting rigs.
    Ready for the Road
    With increased durability and a small profile, it's no wonder that a wide range of performers use AEA's NUVO series microphones on the road. The mics are totally rugged and hold up to daily wear and tear.

    From outdoor gigs at music festivals to indoor theaters, NUVO mics are the perfect companion to bring the sound of studio recordings to the live stage. With the optional NUVO windscreen, never worry about the ribbon, even at windy gigs.
    Features at a Glance
    • Extended top end with a ribbon?s classic warmth
    • Near-field ribbon mic with reduced proximity effect
    • Balanced frequency response at 1 to 18" from the source
    • Compact, lightweight design with rugged durability
    • Active electronics and custom transformer optimized for all preamps
    • Made in the USA
    UPC: 652401977490
    K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)

    The black 210/9 Tripod Microphone Stand with Telescoping Boom from K&M is a height adjustable stand with a 17.1 to 29.3" telescoping boom arm. The microphone stand offers sturdy support for live sound, theater, rehearsal, and recording applications. It features a clutch to allow you to raise the stand height from 35.4 to 63.2" and a 5/8" thread for mounting microphones (available separately).

    UPC: 784887129824
    Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

    The black, 25' Mogami Gold Studio XLR Female to XLR Male Microphone Cable is a high-quality, 4-conductor cable engineered for maximum rejection of RFI and EMI, accurate signal transmission with low noise, and durability. It uses the company's Neglex twisted, double-conductor quad cable with a spiral, bare copper shield, which is effective in maintaining signal integrity, even when used with unbalanced equipment, in professional or home studios suffering from wiring and grounding problems.

    The cable is terminated with black-body, gold-plated XLR connectors, and features a 0.236" diameter jacket, ideal for applications where a small-diameter quad mic cable is required.

    Key Features
    Studio and broadcast-quality microphone cable wired with Mogami 2534 Neglex twisted quad-conductor cable
    Ideal for home studios suffering from wiring and grounding problems?maintains signal quality when used with unbalanced equipment
    Served (spiral) bare copper shield for long-lasting protection against RFI and EMI
    XLPE (Cross-Linked Polyethylene) conductor insulation
    Terminated with black-body, 3-pin XLR connectors (XLR female to XLR male)
    Gold-plated contacts to prevent corrosion
    0.236" jacket diameter?for use where a small-diameter quad mic cable is required
    Limited lifetime warranty
    UPC: 801813075847

    Items Included

    • AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
      • Mic Stand Clip
      • Custom Protective Mic Sleeve
      • Storage Case
      • Limited 1-Year Manufacturer Warranty
        Registration Extension: 2-Year (US Only)
    • K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
      • Limited 3-Year Manufacturer Warranty
    • Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)
      • Limited Lifetime Manufacturer Warranty

    Additional Resources

      Kit Contains:
      AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
      K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
      Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

      AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

      Key Specs
      Microphone Type
      Ribbon
      Polar Pattern
      Figure-8
      Element Type
      Ribbon
      Controls
      No
      Frequency Response
      20 Hz to 20 kHz
      Maximum SPL
      141 dB (1 kHz, 1% THD)
      Analog Output
      1x XLR 3-Pin Male
      Power Sources
      Phantom Power
      Microphone
      Microphone Type
      Ribbon
      Polar Pattern
      Figure-8
      Element Type
      Ribbon
      Sound Field
      Mono
      Diaphragm
      2.35" / 59.69 mm
      Orientation
      Side Address
      Controls
      No
      Pad
      No
      Circuitry
      Solid-State
      Performance
      Frequency Response
      20 Hz to 20 kHz
      Maximum SPL
      141 dB (1 kHz, 1% THD)
      Off-Axis Rejection
      6 dB at 60?
      6 dB at 120?
      0 dB at 180?
      Connectivity
      Analog Output
      1x XLR 3-Pin Male
      Power
      Power Sources
      Phantom Power
      Operating Voltage
      48 V (Phantom Power)
      Physical
      Color
      Silver
      Dimensions
      ?: 1.62 x L: 8.83" / ?: 4.11 x L: 22.43 cm
      Weight
      12 oz / 340 g
      Packaging Info
      Package Weight
      2.255 lb
      Box Dimensions (LxWxH)
      12.2 x 9.1 x 4.3"

      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      Product Information

      Shipping & Returns

      Description

      Kit Contains:
      AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
      K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
      Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

      This Kit includes the AEA NUVO N22 Near-Field Phantom-Powered Ribbon Microphone along with an adjustable tripod stand and a black 25' Mogami Gold XLR cable, so you can plug-in, power up the mic, and start recording instruments and vocals with the classic sound of a ribbon element. The phantom-powered custom transformer and JFET electronics provide +12 dB of output gain, allowing the NUVO N22 to work with a wider range of preamps than traditional passive ribbon mics.

      AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

      Offering the robust sound of a traditional side-address large-ribbon mic in a compact and lightweight form factor designed for near-field use, the AEA Ribbon Mics NUVO N22 active ribbon microphone is ideal for up-close capture of anything from vocals and nuanced acoustic instruments to loud amps and pounding drums, in the studio or on the stage. The inclusion of a custom transformer helps the NUVO N22 achieve a strong output level while retaining low-noise performance.

      As a near-field ribbon, the NUVO N22 provides reduced proximity effect and balanced tonality to make it ideal for placement from 1 to 18" away from the source. Its figure-8 polar pattern exhibits the classic pickup traits and side-rejection qualities associated with ribbon mics. A standard XLR 3-pin male connector is on the mic for hookup to virtually any microphone preamp; 48V phantom power is required to power the mic's active electronics.

      Near-Field Ribbon
      The N22 can be positioned inches away from an instrument and retain a balanced sound with extended top-end while avoiding the room tone that can cause problems in smaller spaces or iso booths. This is what makes the N22 special.
      3 kHz Bump
      It exhibits a high-frequency bump at 3 kHz making it ideal for recording vocals, electric guitar, bass cabs, kick drum, acoustic guitar, and percussion. It is best to think of the N22's placement in terms of inches instead of feet.
      Reduced Proximity Effect
      The N22 naturally reduces proximity effect while also avoiding the room tone that can cause problems in smaller spaces or iso booths. Naturally rolling off the low-end before it hits the ribbon creates a much different sound than using electronic equalization to attenuate the low-end in post.
      Active Electronics
      The N22 uses the same custom transformer utilized in the AEA A440 and R84A microphones, enabling an additional 12 dB of output and a stable impedance. Though it still sounds great with any AEA ribbon-optimized preamp, it is not dependent on a high-impedance, high-gain preamp for proper use.

      The extra output is a major advantage when recording quiet sources like vocals and soft acoustic guitars. The active circuitry also prevents noise and interference on long cable runs and when operating near large lighting rigs.
      Ready for the Road
      With increased durability and a small profile, it's no wonder that a wide range of performers use AEA's NUVO series microphones on the road. The mics are totally rugged and hold up to daily wear and tear.

      From outdoor gigs at music festivals to indoor theaters, NUVO mics are the perfect companion to bring the sound of studio recordings to the live stage. With the optional NUVO windscreen, never worry about the ribbon, even at windy gigs.
      Features at a Glance
      • Extended top end with a ribbon?s classic warmth
      • Near-field ribbon mic with reduced proximity effect
      • Balanced frequency response at 1 to 18" from the source
      • Compact, lightweight design with rugged durability
      • Active electronics and custom transformer optimized for all preamps
      • Made in the USA
      UPC: 652401977490
      K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)

      The black 210/9 Tripod Microphone Stand with Telescoping Boom from K&M is a height adjustable stand with a 17.1 to 29.3" telescoping boom arm. The microphone stand offers sturdy support for live sound, theater, rehearsal, and recording applications. It features a clutch to allow you to raise the stand height from 35.4 to 63.2" and a 5/8" thread for mounting microphones (available separately).

      UPC: 784887129824
      Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

      The black, 25' Mogami Gold Studio XLR Female to XLR Male Microphone Cable is a high-quality, 4-conductor cable engineered for maximum rejection of RFI and EMI, accurate signal transmission with low noise, and durability. It uses the company's Neglex twisted, double-conductor quad cable with a spiral, bare copper shield, which is effective in maintaining signal integrity, even when used with unbalanced equipment, in professional or home studios suffering from wiring and grounding problems.

      The cable is terminated with black-body, gold-plated XLR connectors, and features a 0.236" diameter jacket, ideal for applications where a small-diameter quad mic cable is required.

      Key Features
      Studio and broadcast-quality microphone cable wired with Mogami 2534 Neglex twisted quad-conductor cable
      Ideal for home studios suffering from wiring and grounding problems?maintains signal quality when used with unbalanced equipment
      Served (spiral) bare copper shield for long-lasting protection against RFI and EMI
      XLPE (Cross-Linked Polyethylene) conductor insulation
      Terminated with black-body, 3-pin XLR connectors (XLR female to XLR male)
      Gold-plated contacts to prevent corrosion
      0.236" jacket diameter?for use where a small-diameter quad mic cable is required
      Limited lifetime warranty
      UPC: 801813075847

      Items Included

      • AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
        • Mic Stand Clip
        • Custom Protective Mic Sleeve
        • Storage Case
        • Limited 1-Year Manufacturer Warranty
          Registration Extension: 2-Year (US Only)
      • K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
        • Limited 3-Year Manufacturer Warranty
      • Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)
        • Limited Lifetime Manufacturer Warranty

      Additional Resources

        Kit Contains:
        AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone
        K&M 210/9 Tripod Microphone Stand with Telescoping Boom (Black)
        Mogami Gold Studio XLR Female to XLR Male Microphone Cable (25', Black)

        AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone

        Key Specs
        Microphone Type
        Ribbon
        Polar Pattern
        Figure-8
        Element Type
        Ribbon
        Controls
        No
        Frequency Response
        20 Hz to 20 kHz
        Maximum SPL
        141 dB (1 kHz, 1% THD)
        Analog Output
        1x XLR 3-Pin Male
        Power Sources
        Phantom Power
        Microphone
        Microphone Type
        Ribbon
        Polar Pattern
        Figure-8
        Element Type
        Ribbon
        Sound Field
        Mono
        Diaphragm
        2.35" / 59.69 mm
        Orientation
        Side Address
        Controls
        No
        Pad
        No
        Circuitry
        Solid-State
        Performance
        Frequency Response
        20 Hz to 20 kHz
        Maximum SPL
        141 dB (1 kHz, 1% THD)
        Off-Axis Rejection
        6 dB at 60?
        6 dB at 120?
        0 dB at 180?
        Connectivity
        Analog Output
        1x XLR 3-Pin Male
        Power
        Power Sources
        Phantom Power
        Operating Voltage
        48 V (Phantom Power)
        Physical
        Color
        Silver
        Dimensions
        ?: 1.62 x L: 8.83" / ?: 4.11 x L: 22.43 cm
        Weight
        12 oz / 340 g
        Packaging Info
        Package Weight
        2.255 lb
        Box Dimensions (LxWxH)
        12.2 x 9.1 x 4.3"

        All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
        AEA Ribbon Mics NUVO N22 Near-Field Phantom-Powered Ribbon Microphone Kit with Stand and Cable | Tanotis